The paint-booth tape, cut for your frames.
Q1 Premium Masking Tape is what body shops run along a car before it goes into the oven at 110 °C. On a window frame it does the same job: a razor-sharp line, off in one piece, no glue left behind.
Choose your quantity
- 1 roll €4,95
- 3 rolls €12,95€4,31 per roll
- Sleeve of 6 rolls €25,95€4,32 per roll
- Case of 24 rolls €99,95€4,16 per roll
- 125 µmthin backing, sharp coating edge
- 3 days UVmask, coat and peel the same weekend
- 110 °Ca dark frame baking in the sun is no problem
- 36 mm × 50 mabout 10 windows per roll
36 mm x 50 m
Q1 Premium Masking Tape, 36 mm x 50 m
Sun yellow, razor edge, off in one piece. The tape that keeps brick, stone and glass clean while you coat.
- Order today, ships next working day
- Free shipping from €75
- Ships worldwide
The sun-yellow masking tape professional body shops trust at 110 °C, sized for the edges around your home. Run it where the frame meets brick, bluestone, render, glass or a rubber seal, coat right up to it, and peel it off in one clean piece within three days. No residue, no ghost line, a coating edge you could cut yourself on.
Made in Italy by Q1 Premium Masking Solutions. One 36 mm x 50 m roll masks about 10 windows.
Q1 Premium Masking Tape, 36 mm x 50 m
Complete the job
What this job needs, and the one next to it.
-
PRO+The frames around it: faded aluminium, PVC and powder coating get their colour back for up to 5 years.€79,94 -
Nitrile Grip GlovesKeeps the coating off your hands.€2,00 -
Applicator PadA fresh pad for every window keeps the layer even.€6,95
Why this roll costs more than the beige one
Three things a cheap masking tape cannot do on a dark frame that stands in the sun.
-
Off in one piece
Natural rubber adhesive grips instantly and still peels back clean after three days outdoors. No residue on anthracite, no torn strips.
-
See-through yellow
The translucent backing shows the seal underneath, so you set the line exactly where the coating should stop.
-
Born in the paint booth
Q1 makes this tape in Italy for automotive refinishing: 110 °C for 30 minutes, 3 days of UV, waterborne and solvent paints. A frame in the sun is an easy day.
Made for the edges around your home
Every Afterfade job has a border: where the frame stops and the house begins. This tape is what keeps that border clean.
-
Brick
Natural rubber adhesive grips a rough, dusty joint instantly and still lifts off clean.
-
Bluestone and natural stone sills
No residue on porous stone and no dark ghost line after you peel.
-
Render and plaster
Firm hold on textured walls; the thin backing follows every bump.
-
Glass
Translucent yellow lets you set the line exactly on the bead. Prep+ and Pro-Tech+ stop at the tape.
-
Rubber seals and silicone joints
Conforms around rounded gaskets without lifting and comes off in one strip.
-
Wood and cladding
Clean removal within three days: no fibres, no torn finish.
Mask it. Prep it. Coat it. Peel it.
-
Mask
Run the tape along every edge where the frame meets brick, stone, glass or a seal. Press the edge down with a thumb. Clean, dry surface, at least 10 °C.
-
Prep
Spray Prep+ and wipe. The adhesive is compatible with waterborne and solvent products, so the degreaser will not lift it.
-
Coat
Apply Pro-Tech+ right up to the tape. The 125 µm backing leaves a low, sharp edge instead of a ridge.
-
Peel
Within three days, pull the tape back on itself at a low angle. One piece, no residue, a line you could cut yourself on.
Why not the beige roll from the DIY shop?
- Beige tape bleeds under a wipe-on coating. The Q1 edge stays sharp.
- Cheap tape bakes onto a dark frame in the sun and leaves glue behind. Q1 lifts off clean after three days outdoors.
- Opaque tape hides the line. Q1 is translucent, so you place it exactly where the coating should stop.
By the roll, the sleeve or the case
One roll masks about 10 windows. Whole-house jobs and pros take the sleeve or the case and pay less per roll.
Technical data
- Backing
- Saturated semi-crepe paper
- Adhesive
- Natural rubber, pressure sensitive
- Total thickness
- 125 µm
- Weight
- 92 g/m²
- Tensile strength
- 38 N/cm
- Adhesion to steel
- 2,3 N/cm
- Elongation at break
- 7%
- Temperature resistance
- 110 °C for 30 min, 90 °C for 60 min
- UV resistance
- 3 days outdoors
- Colour
- Sun yellow, translucent
- Size
- 36 mm × 50 m
- Made in
- Brembate di Sopra, Italy
Store dry and out of sunlight at 15 to 25 °C. Use within 12 months.
Made in Italy by Q1® Premium Masking Solutions, the masking brand of professional body shops. Part MT136, 24 rolls to a case.
